Jan 10 2008

3.5″ Portable GPS Navigator

Published by qihoo8 at 6:53 am under GPS

* 3.5″ TFT GPS navigator
* O/S: WinCE.Net 4.2 Core
* CPU: Samsung ARM920T S3C2440A 300/400MHz
* Flash: 32/64/128/256/512MB/1GB
* SDRAM: low power 64MB
* LCD: LTV350QV-F04, transmissive with micro reflective TFT
76.9mm (H) x 63.9mm (V) x 3.15mm (D)
320RGB (H) x 240 (V) pixels
Brightness: 250cd/m²
C/R=300
6-LED backlight
* TSP: touch screen supported
* USB: USB client 1.1, full speed (12Mbps), mini slot with USB mass storage function or ActiveSync
* UART: 3.3V TTL UART for GPS module
* SD: SD / multimedia card slot
* Audio: mono 1W@8 ohms or 2W@4 ohms
Speaker stereo: 20mW/32 ohms headphone
* Button: menu / power on / sleep / volume up, volume down with key hold function
hidden reset
* Switch: battery switch
* GPS receiver: module and antenna built in
* External antenna connector
* GPS: SiRF star III (optional)
Cold start : <42sec
Hot start : <1sec (open sky)
Warm start : <18sec
* Battery: 1,100~1,600mAh/3.7V Li rechargeable
* Battery charging current=750~1,000mA
* Charging 5V DC power jack
* Car adapter: 12V DC to 5V DC 2A
* LED status
1) Adapter plug in and battery charging (red LED on, green LED off)
2) Adapter plug in and battery full (red LED off, green LED on)
* Operation temperature: 0oC to 60oC
* Storage temperature: -20oC to 60oC
* Navigation software third party
* Video player: WMV9, MPEG4, Divx 5.0, 4.0, 3.11, Xvid and MPEG2 up to 320 x 240
resolutions, supports .WMV, .ASF and .AVI file format
* Audio player: WMA9, MP3 up to 320Kbps and WAV
* Photo viewer: JPG, GIF, BMP and PNG
* Ebook reader: TXT
* System setting: back light/date time/volume/power/sys info
* OS update via SD card
* AP update via SD card
* Logo up data via SD card
* Accessories: stand, AC/DC adaptor, cable

Related Posts:

Trackback URI | Comments RSS

Leave a Reply